Gallery
Showing posts with label P1800. Show all posts
Showing posts with label P1800. Show all posts

Saturday, June 4, 2011

Happy 50 P1800 Again!

A true cosmopolitan turns 50


Volvo P1800 1961 - 2011


Planned in Sweden, designed in Italy, unveiled at the car show in Brussels, built in Britain and a huge success in the USA. The Volvo P1800 is perhaps Volvo's most internationally renowned model ever and the one that arouses most emotions. In 2011 this remarkable people's favourite turns 50. It was in 1961 that it entered production and reached showrooms after four years of careful planning and development, remaining in production for the next twelve years. From the sales perspective it played perhaps a marginal role for the company, but from the image viewpoint it played a far bigger role than any previous Volvo model – and few if any subsequent models have matched it image-wise.


Design coup

The Volvo P1800 was born for that very reason – to attract the attention of passersby to Volvo's display windows and to increase what today is known as 'floor traffic' so that people who entered the showroom left it in a new Volvo.
Volvo had tried its hand at a sports car back in the early 1950s – the open two-seater plastic-bodied Volvo Sport which was built from 1955 to 1957 with a total production run of just 67 cars. "Not a bad car, but a bad Volvo" was the way Volvo President Gunnar Engellau put it when he retired the model. However, he did recognise the importance of having a prestigious and exciting model to boost overall sales, and Volvo dealers were desperate for just such a car.
Design proposals were ordered from Italy, where Volvo consultant Helmer Petterson – who was deeply involved in the planning of the new car – had got his son Pelle a job at Pietro Frua thanks to Pelle's fresh degree in industrial design from the Pratt Institute in New York. When the time came to unveil the four proposals to Volvo's board in 1957, Helmer sneaked in his son Pelle's fifth design – and that was the one that everyone picked. Engellau in particular liked it since he had very definite views about wanting an Italian-designed car. That of course is precisely what he did get, but it was penned by a 25 year old native of Göteborg who would later make his mark as a boat designer and win Olympic medals in yacht racing. Eventually, however, the truth behind the winning design proposal emerged. The choleric Engellau blew his top, felt he had been hoodwinked and promised that Pelle would never be acknowledged as the car's designer. And indeed many years went by before the truth was made known and Pelle Petterson received the credit he was due for penning one of the world's most attractive sports coupes.

The new sports car – which is how Volvo presented the model – had a fixed roof, a steel body, a lot of the mechanical components lifted straight from the Amazon and the newly developed B18 engine in its 100 hp sports version when it eventually arrived in the showrooms.

Three prototypes were built by Frua in Turin in 1957-1958 on Amazon underpinnings and these cars were used for a variety of purposes, for instances as templates for the production of press tools, in a range of tests, at shows, for press work and advertising photo-shoots and much else. All three have survived and are still on the road.

Production overseas

At this time, Volvo found itself in a hugely expansive phase and the company realised from the outset that it did not have sufficient in-house capacity to manufacture the new model – not for pressing of body panels, nor for painting or assembly, not even on a small scale. The hunt for a suitable partner got under way, led by Helmer Petterson, and after much deliberation a decision was taken to use two British companies to build the car: Pressed Steel would build the bodies and Jensen Motors would paint and assemble the cars. Production got under way but this was a far from friction-free method. Constant problems with personnel, working methods, quality, suppliers and logistics along with an unwillingness to deal with these issues meant that as soon as it was possible, Volvo transferred production home to Sweden.

As of spring 1963 – after 6000 Jensen-built cars – production of the 1800 started up in Volvo's Lundby factory but it was not until 1969 that body pressings were transferred from Pressed Steel in Scotland to Volvo's press shop in Olofström. The move home also coincided with a change of name for the P1800. First it was badged the P1800 S, later in 1963 it was known simply as the 1800 S, S standing for Sweden.

During the coupe's long life, no radical changes were made to the successful exterior lines. Only details such as the grille, trim mouldings, wheels and colours differentiate the various model years. From the technical viewpoint the 1800 shadowed the development of Volvo's other models and was continuously upgraded. Disc brakes all round, more powerful engines and electronic fuel injection were the most noticeable changes.

Cult car for The Saint and a world record-holder

In 1971, however, a new body variant was presented, the 1800 ES. A sporting hatchback with an extended roofline and an estate car rear featuring a large glass tailgate. A GT and estate car combined. The ES was designed in Göteborg and attracted considerable attention, but it also divided opinion into two camps. It has nonetheless achieved cult status along with its coupe sister and many have survived to this day. Volvo's 1800 models are very sought-after by enthusiasts – there are several clubs serving the model – and they were for many years relatively inexpensive to buy, although in recent years their prices have started to rise on the classic-car market. Renovating an 1800 is neither easy nor cheap. Many parts are no longer available, particularly for the Jensen-built cars, but owners who have taken the trouble can expect many miles behind the wheel of an exceptionally pleasant, agile and robust car whose value to Volvo in terms of image can never really be fully quantified.

Just ask Roger Moore, who was fortunate enough to drive a P1800 in his role as debonair crime-fighter Simon Templar, a sort of modern-day Robin Hood, in the British TV drama series based on Leslie Charteris's "The Saint". The TV production company was looking for an attractive sports car that would suit a gentleman of independent means, and after being turned down by Jaguar approached Volvo to ask for the P1800. Volvo was quick to oblige. It was a brilliant PR move for the new Volvo model and the car became etched firmly in the minds of everyone at the time. To this day the P1800 is still often referred to as The Saint's car.


Another person who can testify to the car's excellence is New Yorker Irv Gordon, who has covered more than 4,500,000 kilometres in the 1800 S he purchased in 1966, making him the holder of a Guinness world record that will probably never be able to be beaten. Irv Gordon has spent a total of almost 12 years behind the wheel of his car and he is now aiming for 3,000,000 miles, that is to say about 4,800,000 kilometres. On the same engine!


Timeless 50 year old

The Volvo P1800, this alert 50 year old, was never intended to be a mass-produced car. It was and still is a niche product, the top of the model range, yet at the same time viable enough to be within the reach of ordinary people who wanted a car that looked like a Ferrari but cost and functioned like a Volvo: pleasant, reliable and economical. It appealed to people even before it arrived in the showrooms in 1961 and its design has been shown to stand the test of time: it is timeless, classic and sporty in a well-balanced way. Congratulations to Gunnar Engellau and Helmer Petterson who pushed for Volvo to build the car, to Pelle Petterson who designed it, to Volvo who kept the model going in good times and bad over a period of twelve years, and to all those people who today own and value an 1800 – a truly living piece of Volvo history.


source

Monday, February 28, 2011

Volvo P1800ES Gallery


Sunday, February 27, 2011

POTD: Volvo P1800

source

Saturday, February 26, 2011

Volvo History: Happy 50 P1800!

The Saint turns 50 this year.

History
The project was started in 1957 because Volvo wanted a sports car, despite the fact that their previous attempt, the P1900, had been a disaster, with only 68 cars sold. The man behind the project was an engineering consultant to Volvo, Helmer Pettersson, who in the 1940s was responsible for the Volvo PV444. The design work was done by Helmer's son Pelle Pettersson, who worked at Pietro Frua at that time. Volvo insisted it was an Italian design by Frua and only officially recognized that Pelle Pettersson designed it in 2009. The Italian Carrozzeria Pietro Frua design firm (then a recently acquired subsidiary of Ghia) built the first three prototypes, designated: P958-X1, P958-X2 and P958-X3.

In December 1957 Helmer Petterson drove X1, (the first hand-built P1800 prototype) to Osnabrück, West Germany, headquarters of Karmann. Petterson hoped that Karmann would be able to take on the tooling and building of the P1800. Karmann's engineers had already been preparing working drawings from the wooden styling buck at Frua. Petterson and Volvo chief engineer Thor Berthelius met there, tested the car and discussed the construction with Karmann. They were ready to build it and this meant that the first cars could hit the market as early as December 1958. But in February, Karmann's most important customer, Volkswagen AG, forbade Karmann to take on the job.They were afraid that the P1800 would compete with the sales of their own cars, and threatened to cancel all their contracts with Karmann if they took on the coachbuilding of this car. This setback almost caused the project to be abandoned.

Other German firms NSU, Drautz and Hanomag were contacted but none of them were selected because Volvo did not believe these firms met their manufacturing quality control standards.

It began to appear that Volvo might never produce the P1800. This motivated Helmer Petterson to obtain financial backing from two financial firms with the intention of buying the components directly from Volvo, and marketing the car himself. At this point Volvo had made no mention of the P1800 and the factory would not comment. Then a press release surfaced with a photo of the car, putting Volvo in a position where they had to acknowledge the car's existence. These events influenced the company to renew its efforts, the car was presented to the public for the first time at the Brussels Motor Show in January 1960 and Volvo turned to Jensen Motors whose production lines were under capacity, and they agreed to a contract of 10,000 cars.The Linwood, Scotland, body plant of manufacturer Pressed Steel was in turn contracted by Jensen to create the unibody shell, which then shipped via rail to be assembled at Jensen in West Bromwich, England. In September 1960, the first production P1800 (for the 1961 model year) left Jensen for an eager public.


P1800The engine provided was the B18 (B for the Swedish word for gasoline: Bensin; 18 for 1800 cc displacement) with dual SU carburettors, producing 100 hp (75 kW). This variant (named B18B) had a different camshaft from, and higher compression than, the slightly less powerful twin-carb B18D used in the contemporary Amazon 122S. The 'new' B18 was actually developed from the pre-existing B36 V8 engine employed in Volvo trucks at the time. This cut production costs, as well as furnishing the P1800 with a strong engine boasting five main crankshaft bearings. The B18 was matched with the new and more robust M40 manual gearbox through 1963. From 1963 to 1972 the M41 gearbox with electrically actuated overdrive was a popular option. Two overdrive types were used, the D-Type through 1969, and the J-type through 1973. The J-type had a slightly shorter ratio of 0.797:1 as opposed to 0.756:1 for the D-type. The addition of this overdrive gave the 1800 series a defacto fifth gear, allowing it greater fuel efficiency and decreased drivetrain wear. Cars sold without overdrive had a numerically lower geared differential, which had the interesting effect of giving them a somewhat higher top speed (just under 120 mph) than the more popular overdrive models. This was because the non-overdrive cars could reach the engine's redline in top gear, while the overdrive-equipped cars could not, giving the latter a top speed of roughly 110 mph (177 km/h).


1800SAs time progressed, Jensen had problems with quality control, so the contract was ended early at 6,000 cars. In 1963 production was moved to Volvo's Lundby Plant in Gothenburg and the car's name was changed to 1800S (the 'S' indicating Swedish assembly). The engine was improved with an additional 8 hp (6 kW). In 1966 the four-cylinder engine was updated to 115 hp (86 kW). Top speed was 175 km/h (109 mph). In 1969 the B18 engine was replaced with the 2-liter B20B variant of the B20 giving 118 bhp (89 kW), though it kept the designation 1800S.


1800EFor 1970 numerous changes came with the fuel-injected 1800E, which had the B20E engine with Bosch D-Jetronic fuel injection and a revised camshaft and produced 130 bhp (97 kW) from its 2-litres without sacrificing fuel economy. Top speed was around 190 km/h (just under 120 mph) and acceleration from 0–100 km/h (0-62.1 mph) was 9.5 seconds. In addition, the 1970 model was the first 1800 to appear with four-wheel disc brakes. Prior to this, the 1800 series had front discs and rear drums.


1800ESIn 1972 came the last model, the 1800ES, a coupé station wagon or what the British would call a shooting-brake version with an all-glass tailgate. The final design was chosen after two prototypes had been built by Coggiola and Pietro Frua. Frua's very unusual looking prototype,Raketen ("the Rocket", on the right), currently resides in the Volvo Museum. Both of the Italian prototypes were considered too futuristic, and instead in-house designer Jan Wilsgaard's proposal was accepted. The ES engine was downgraded to 125 bhp (92 kW) by reducing the compression ratio with a thicker head gasket (engine variant B20F); although maximum power was slightly down the engine was less "peaky" and the real-world performance was actually improved.

P1800ES
The ESs rear backrest folded down to create a long flat loading area. In addition to the usual four-speed plus overdrive manual transmission, a Borg-Warner three-speed automatic was also available in the P1800ES. With stricter American safety and emissions standards looming for 1974, Volvo did not see fit to spend the considerable amount that would be necessary to redesign the small-volume P1800 ES. Only 8,077 of the ES were built in its two model years.


Volvo P1800 timeline


  • 1959 – Volvo announces P1800 prototype built by Frua.
  • 1960 – The car is showcased in Brussels, first pre-production cars tested.
  • 1961 – Production car: 2-door coupe, steel body, 2+2 seating, 1.8-liter twin carburettor engine, 100 bhp/5,500 rpm. First 6,000 cars assembled in the UK by Jensen Motors.
  • 1963 – P1800 is renamed 1800S to mark the start of Swedish assembly. Introduction of the 1964 model with improved 108 bhp engine, improved brakes and modified seats.
  • 1964 – Revised interior, straight bumpers with rubber inserts.
  • 1965 – Power increased to 115 bhp, diaphragm clutch, sealed greasing, improved brakes.
  • 1966 – Modified front grille, chrome side trim introduced.
  • 1967 – Three spoke steering wheel, minor interior changes.
  • 1968 – 2.0-liter engine type B20, 118 bhp/5,800 rpm, fitted with emission equipment. Dual circuit braking system introduced.
  • 1969 – 1800E model with Bosch electronic fuel injection developing 130 bhp at 6,000 rpm (B20E). ZF gearbox, disc brakes on all wheels, alloys, new dashboard.
  • 1970 – Stronger Volvo-built manual gearbox or optional Borg-Warner 3 speed automatic introduced.
  • 1971 – 1800ES estate car launched.
  • 1972 – 112 bhp B20F engine USA-emissions compliant.
  • 1973 – Production ends.



text: wikipedia
Volvo P1800, 1963 - Photography by René Staud
Volvo P1800 ES, 1972-73 - carstyling